Optical Parameter | |||
Output Wavelength | 850±5nm | ||
Laser Diode | Multi Transverse Mode | ||
Spectral Width (FWHM) | 2nm | ||
Output Power after Coupler | 200mW, <500mW | 800mW, 1000mW, 1500mW | |
FDA Safety Class | Class IIIb | Class IV | |
Operating Mode | CW | ||
Beam Focus to | <200μm | ||
Fiber Connector | FC/PC, FC/APC, SMA905 | ||
Fiber can be Attached | 200μm, 400μm, 600μm MM fiber | ||
Power Stability | 1% or 3% (rms, over 2 hours, T= 25℃) | ||
Optical Noise | 1% (rms, 20Hz~20MHz) | ||
Electrical Parameter | |||
Power Supply | ADR-180A | ||
Adjustable Power Supply, with LED Display | |||
Input Voltage | 85~240VAC, 50/60Hz | ||
Modulation | TTL or Analog Modulation | ||
Mechanical Parameter | |||
Dimensions of Laser Head | 140 × 49 × 42mm | ||
Weight of Laser Head | 0.6Kg | ||
Dimensions of Power Supply | 150 × 110 × 56mm | ||
Weight of Power Supply | 0.6Kg | ||
Reliability | |||
Warm Up Time | <10 minutes | ||
Cooling | TEC, Forced-air cooled | ||
Operating Temperature, Case | 10℃ ~ 35℃ | ||
Storage Temperature | -20℃ ~ 60℃ | ||
Expected Operation Lifetime | 10000 hours | ||
Warranty | 12 months | ||
Note | |||
» The Laser is designed to operate without heat sink. Do not restrict air circulation around the device; an additional heat sink can be used to maximize the performance and life time of the laser. » All specifications are based on performance at full output power and after the specified warmup period. Output characteristics may change if the laser is run at a different power level. » 2-Year Warranty is available upon request. |
Accessories (optional) | ||
Laser Products | |||||
Model | Output Power after Coupler | Power Stability (2hrs, 25℃) | Power Supply | Fiber Connector | IEC/CDRH Laser Class |
IRM850TA-200FC | 200mW | 3% rms | ADR-180A | FC/PC | Class 3B/IIIb |
IRM850TA-500FC | <500mW | 3% rms | ADR-180A | FC/PC | Class 3B/IIIb |
IRM850TA-800FC | 800mW | 3% rms | ADR-180A | FC/PC | Class 4/IV |
IRM850TA-1000FC | 1000mW | 3% rms | ADR-180A | FC/PC | Class 4/IV |
IRM850TA-1500FC | 1500mW | 3% rms | ADR-180A | FC/PC | Class 4/IV |
Laser Head, TA with Fiber Coupler | ||
ADR-180A Power Supply | ||