Optical Parameter | |||||
Output Wavelength | 671±1nm | ||||
Output Power without Coupler | 50mW | 100mW | 150mW | 200mW | |
Output Power after Coupler | 40mW | 80mW | 120mW | 160mW | |
Fiber Coupling Efficiency | 80% | ||||
Beam Focus to | <100μm | ||||
Fiber Connector | FC/PC, FC/APC, SMA905 | ||||
Fiber can be Attached | 100μm, 200μm, 400μm, 600μm MM fiber | ||||
FDA Safety Class | Class IIIb | ||||
Operating Mode | CW | ||||
Power Stability | 3% or 5% (rms, over 2 hours, T= 25℃) | ||||
Electrical Parameter | |||||
Power Supply | ADR-700A | ADR-700D | |||
Adjustable Power Supply | FDA Power Supply | ||||
Input Voltage | 85~240VAC, 50/60Hz | ||||
Modulation | TTL on/off (≤100Hz) | ||||
Mechanical Parameter | |||||
Dimensions of Laser Head | 146 × 73 × 46. 2mm | ||||
Weight of Laser Head | 0.6Kg | ||||
Dimensions of Power Supply | 188 × 155 × 92mm | 171 × 130 × 62.2mm | |||
Weight of Power Supply | 1.5Kg | 1.2Kg | |||
Reliability | |||||
Warm Up Time | <10 minutes | ||||
Cooling | TEC, Forced-air cooled | ||||
Operating Temperature, Case | 10℃ ~ 35℃ | ||||
Storage Temperature | -20℃ ~ 60℃ | ||||
Expected Operation Lifetime | 10000 hours | ||||
Warranty | 12 months | ||||
Note | |||||
» The Laser is designed to operate without heat sink. Do not restrict air circulation around the device; an additional heat sink can be used to maximize the performance and life time of the laser. » All specifications are based on performance at full output power and after the specified warmup period. Output characteristics may change if the laser is run at a different power level. » 1KHz TTL modulation, 10KHz TTL modulation, 30KHz TTL modulation and 2KHz Analog Modulation are available upon request. » 2-Year Warranty is available upon request. |
Accessories (optional) | ||
Laser Products | |||||
Model | Output Power after Coupler | Power Stability (2hrs, 25℃) | Modulation | Fiber Connector | IEC/CDRH Laser Class |
RL671T3-050FC | 40mW | 5% rms | TTL on/off | FC/PC | Class 3B/IIIb |
RL671T3-100FC | 80mW | 5% rms | TTL on/off | FC/PC | Class 3B/IIIb |
RL671T3-150FC | 120mW | 5% rms | TTL on/off | FC/PC | Class 3B/IIIb |
RL671T3-200FC | 160mW | 5% rms | TTL on/off | FC/PC | Class 3B/IIIb |
RL671T3H-050FC | 40mW | 3% rms | TTL on/off | FC/PC | Class 3B/IIIb |
RL671T3H-100FC | 80mW | 3% rms | TTL on/off | FC/PC | Class 3B/IIIb |
RL671T3H-150FC | 120mW | 3% rms | TTL on/off | FC/PC | Class 3B/IIIb |
RL671T3H-200FC | 160mW | 3% rms | TTL on/off | FC/PC | Class 3B/IIIb |
Mechanical Drawing | ||
ADR-700A Power Supply | ||
ADR-700D Power Supply | ||
Laser | ||