GL532RA Series Laser | |||
The 532nm Raman Laser Module is is a highly integrated laser module with laser optics and electronics in a single package. It features different fiber coupling option with very narrowand stable optical spectrum width which is ideal for your raman application. Laser output power can be remotely controlled and monitored. The unique designed electrical driver enable this Laser Module has the lowest power consumptions compare to the similar product in the industry. The 532nm Raman Laser Module utilize unique technology to stabilize laser wavelength and has a narrow spectrum width less than 0.1nm which made this laser an ideal laser source for all your Raman applications. |
|||
Optical Parameter | |||
Output Wavelength | 532±0.5nm | ||
Operating Mode | CW | ||
Fiber Coupled to | SM Fiber or PM Fiber | ||
Output Power after SM/PM Fiber | 20mW, 50mW, 100mW | ||
FDA Safety Class | Class IIIb | ||
Spectral Linewidth (FWHM) | <0.09nm | ||
Wavelength Drift | 0.01nm/℃ | ||
Fiber Connector | FC/PC, FC/APC or SMA905 | ||
SM/PM Fiber Length | 1m | ||
Power Stability | 3% (rms, over 2 hours, T= 25℃) | ||
Optical Noise | 1% (rms, 20Hz~20MHz) | ||
Residual IR | <0.1% | ||
Electrical Parameter | |||
Power Supply | ADR-180A | ||
Adjustable Power Supply, with LED Display | |||
Input Voltage | 85~240VAC, 50/60Hz | ||
Modulation | TTL Modulation | ||
Mechanical Parameter | |||
Dimensions of Laser Head | 140 × 49 × 42mm | ||
Weight of Laser Head | 0.6Kg | ||
Dimensions of Power Supply | 150 × 110 × 56mm | ||
Weight of Power Supply | 0.6Kg | ||
Reliability | |||
Warm Up Time | <10 minutes | ||
Cooling | TEC, Forced-air cooled | ||
Operating Temperature, Case | 10℃ ~ 35℃ | ||
Storage Temperature | -20℃ ~ 60℃ | ||
Expected Operation Lifetime | 10000 hours | ||
Warranty | 12 months | ||
Note | |||
» The Laser is designed to operate without heat sink. Do not restrict air circulation around the device; an additional heat sink can be used to maximize the performance and life time of the laser. » All specifications are based on performance at full output power and after the specified warmup period. Output characteristics may change if the laser is run at a different power level. » The SM/PM fiber is connected to the laser head permanently; please do not remove the SM/PM fiber. Please do not pull the SM/PM fiber. » 2-Year Warranty is available upon request. |
Accessories (optional) | |||
Ordering Code | ||
TA Laser Head, SM/PM Fiber Coupled | ||
ADR-180A Power Supply | ||