Output Wavelength | 1319±1nm | ||||
Laser Crystal | Nd:YAG | ||||
Output Power | 10mW, 20mW, 30mW, 50mW | ||||
FDA Laser Class | Class IIIb | ||||
Operating Mode | CW | ||||
Transverse Mode | TEM00 | ||||
Longitudinal Mode | Single | ||||
Spectral Linewidth | 0.00001nm | ||||
Mode Quality (M2) | <2.0 | ||||
Beam Divergence, Full Angle | 1.5mrad | ||||
Beam Diameter (1/e2) @ Exit | 1.5mm | ||||
Power Stability | 1% or 3% (rms, over 2 hours, T= 25℃) | ||||
Coherent Length | >50m | ||||
Optical Noise | 0.5% (rms, 20Hz~20MHz) | ||||
Beam Pointing Stability | <50μrad (after warm-up, 2 hours, T= 25℃) | ||||
Polarization, Linear | >100:1 | ||||
Electrical Parameter | |||||
Power Supply | ADR-800D | ||||
FDA Power Supply | |||||
Input Voltage | 85~240VAC, 50/60Hz | ||||
Modulation | None | ||||
Mechanical Parameter | |||||
Dimensions of Laser Head | 207 × 70 × 50mm | ||||
Weight of Laser Head | 2.0Kg | ||||
Dimensions of Power Supply | 275 × 145 × 104mm | ||||
Weight of Power Supply | 2.3Kg | ||||
Reliability | |||||
Warm Up Time | <10 minutes | ||||
Cooling | TEC, Forced-air cooled | ||||
Operating Temperature, Case | 10℃ ~ 35℃ | ||||
Storage Temperature | -20℃ ~ 60℃ | ||||
Expected Operation Lifetime | 10000 hours | ||||
Warranty | 12 months | ||||
Note | |||||
» The Laser is designed to operate without heat sink. Do not restrict air circulation around the device; an additional heat sink can be used to maximize the performance and life time of the laser. » All specifications are based on performance at full output power and after the specified warmup period. Output characteristics may change if the laser is run at a different power level. » 2-Year Warranty is available upon request. |
Accessories (optional) | |||
Laser Products | ||||
Model | Output Power | Longitudinal Mode | Power Stability (2hrs, 25℃) | IEC/CDRH Laser Class |
IR1319S8-010 | 10mW | Single | 3% rms | Class 3B/IIIb |
IR1319S8-020 | 20mW | Single | 3% rms | Class 3B/IIIb |
IR1319S8-030 | 30mW | Single | 3% rms | Class 3B/IIIb |
IR1319S8-050 | 50mW | Single | 3% rms | Class 3B/IIIb |
Mechanical Drawing | ||
ADR-800D Power Supply | ||
Laser | ||