Optical Parameter | |||
Output Wavelength | 450±5nm | ||
Output Power | 200mW, 300mW, <500mW | 600mW, 800mW, 1000mW | |
FDA Laser Class | Class IIIb | Class IV | |
Operating Mode | CW | ||
Transverse Mode | Near TEM00 | ||
Mode Quality (M2) | <2.0 | ||
Beam Divergence, Full Angle | 1.5mrad | 3 × 0.5mrad | |
Beam Diameter (1/e2) @ Exit | 5.0mm | 2 × 4mm | |
Power Stability | 1% or 3% (rms, over 2 hours, T= 25℃) | ||
Pointing Stability | <50μrad (after warm-up, 2 hours, T= 25℃) | ||
Electrical Parameter | |||
Power Supply | ADR-700A | ADR-700D | |
Adjustable Power Supply | FDA Power Supply | ||
Input Voltage | 85~240VAC, 50/60Hz | ||
Modulation | TTL or Analog Modulation | ||
Mechanical Parameter | |||
Dimensions of Laser Head | 140. 5 × 73 × 46. 2mm | ||
Weight of Laser Head | 0.6Kg | ||
Dimensions of Power Supply | 188 × 155 × 92mm | 171 × 130 × 62.2mm | |
Weight of Power Supply | 1.5Kg | 1.2Kg | |
Reliability | |||
Warm Up Time | <10 minutes | ||
Cooling | TEC, Forced-air cooled | ||
Operating Temperature, Case | 10℃ ~ 45℃ | ||
Storage Temperature | -20℃ ~ 60℃ | ||
Expected Operation Lifetime | 10000 hours | ||
Warranty | 12 months | ||
Note | |||
» The Laser is designed to operate without heat sink. Do not restrict air circulation around the device; an additional heat sink can be used to maximize the performance and life time of the laser. » All specifications are based on performance at full output power and after the specified warmup period. Output characteristics may change if the laser is run at a different power level. » 2-Year Warranty is available upon request. |
Accessories (optional) | |||
Laser Products | |||||
Model | Output Power | Power Stability (2hrs, 25℃) | Beam Diameter | Beam Divergence | IEC/CDRH Laser Class |
BLM450T3-200 | 200mW | 3% rms | 5mm | 1.5mrad | Class 3B/IIIb |
BLM450T3-300 | 300mW | 3% rms | 5mm | 1.5mrad | Class 3B/IIIb |
BLM450T3-500 | <500mW | 3% rms | 5mm | 1.5mrad | Class 3B/IIIb |
BLM450T3-600 | 600mW | 3% rms | 2 × 4mm | 3.0 × 0.5mrad | Class 4/IV |
BLM450T3-800 | 800mW | 3% rms | 2 × 4mm | 3.0 × 0.5mrad | Class 4/IV |
BLM450T3-1000 | 1000mW | 3% rms | 2 × 4mm | 3.0 × 0.5mrad | Class 4/IV |
Mechanical Drawing | ||
ADR-700A Power Supply | ||
ADR-700D Power Supply | ||
Laser | ||