Shanghai Laser & Optics Century Co., Ltd. (SLOC) | Laser | Manufacturer of DPSS Green Laser, Blue Laser, Red Laser, Yellow Laser, Infrared Laser, UV Laser | 635nm and 650nm Laser Modules | Laser Diode | Scanner, Line Lens, Combiner, Beamsplitter, Filter, Rod Lens, Ball Lens | Fiber Coupled, RGB Laser, Low Noise, SLM, Line Laser, Laser Pointer, Portable Laser

PRODUCT MENU

SCN805 Scanning System

SCN805 is the fastest close-loop scanner made in China for laser display. The galvo of SCN805 uses a double length magnetic rotator compared with that of SCN800. Therefore, SCN805 is more powerful than SCN800. The new SCN805 scanning system powered by our new Amp, Scan-V4.3A can scan at over 60Kpps @ ±12° optical with mirror size of 6mm × 11mm × 0.7mm. Higher scan speed can be achieved by using smaller mirrors and higher voltage.

Contents of Shipping Package
	2 × Scanner (Galvo) with Mirror 2 × Scan V4.3A Servo Driver (Amp) 1 × (X-Y) Scanner Mount 1 × ±24VDC Switched Power Supply 2 × Shield Cable for Scanner

SCN805 Scanning System
Scan Angle	±20° (Factory Calibration)
Scan Speed	39Kpps (±20°, 6×11×0.7mm Mirror)
Max Scan angle	±30°
Mirror Size	6 × 11 × 0.7mm	5 × 10 × 0.7mm
Mirror coating	High Quality Dielectric Film
Reflectivity	>98% @ 45° Incidence (400nm-700nm)
Dimension of Galvo	Φ12.7 × 62.8mm
Power requirements	±24VDC @1.2A each
Input Voltage	±5VDC Differential
Dimensions of Driver	81.6 × 66 × 43mm
Protection Circuitry	Input Clamping and Power Limiter Circuit Built in Amp.

Scanning Speed
Operating Voltage	±24VDC
Test Pattern	ILDA 30K
Scan Angle	±30°	±20°	±15°	±8°	±5°
Speed @ 6×11×0.7mm Mirror	31Kpps	39Kpps	51Kpps	60Kpps	72Kpps
Speed @ 5×10×0.7mm Mirror	33Kpps	43Kpps	53Kpps	64Kpps	-
Note
When you use scanner in laser project, the scan speed (controller output) that ILDA suggests is 80% of the scanner speed, it will be good for scanner working for long time.

Diagram Wiring for SCN805	SCN805 Dimension Drawing for Galvo

SCN805 Dimension Drawing for AMP	SCN805 Dimension Drawing for Mount

SCN805 Dimension Drawing for Power	SCN805 Dimension Drawing for Cable