Optical Parameter | ||||
Output Wavelength | 532±1nm | |||
Operating Mode | CW | |||
Fiber Coupled to | SM Fiber or PM Fiber | |||
Output Power without Fiber Coupling | 20mW | 50mW | 100mW | |
Output Power after SM/PM Fiber | 10mW | 25mW | 50mW | |
Fiber Coupling Efficiency | 50% | |||
FDA Safety Class | Class IIIb | |||
Fiber Connector | FC/PC, FC/APC or SMA905 | |||
SM/PM Fiber Length | 1m | |||
Power Stability | <3% (rms, over 2 hours, T= 25℃) | |||
Electrical Parameter | ||||
Power Supply | ADR-180A | |||
Adjustable Power Supply, with LED Display | ||||
Input Voltage | 85~240VAC, 50/60Hz | |||
Modulation | TTL or Analog Modulation | |||
Mechanical Parameter | ||||
Dimensions of Laser Head | 140 × 49 × 42mm | |||
Weight of Laser Head | 0.6Kg | |||
Dimensions of Power Supply | 150 × 110 × 56mm | |||
Weight of Power Supply | 0.6Kg | |||
Reliability | ||||
Warm Up Time | <10 minutes | |||
Cooling | TEC, Forced-air cooled | |||
Operating Temperature, Case | 10℃ ~ 35℃ | |||
Storage Temperature | -20℃ ~ 60℃ | |||
Expected Operation Lifetime | 10000 hours | |||
Warranty | 12 months | |||
Note | ||||
» The Laser is designed to operate without heat sink. Do not restrict air circulation around the device; an additional heat sink can be used to maximize the performance and life time of the laser. » All specifications are based on performance at full output power and after the specified warmup period. Output characteristics may change if the laser is run at a different power level. » The SM/PM fiber is connected to the laser head permanently; please do not remove the SM/PM fiber. Please do not pull the SM/PM fiber. » 2-Year Warranty is available upon request. |
Accessories (optional) | |||
Ordering Code | ||
TA Laser Head, SM/PM Fiber Coupled | ||
ADR-180A Power Supply | ||