Optical Parameter | |||||
Output Wavelength | 656.5±1nm | ||||
Output Power | 20mW, 50mW, 100mW, 150mW, 200mW | ||||
FDA Laser Class | Class IIIb | ||||
Operating Mode | CW | ||||
Transverse Mode | TEM00 | ||||
Longitudinal Modes | Multiple | ||||
Mode Quality (M2) | <1.2 | ||||
Beam Divergence, Full Angle | 1.5mrad | ||||
Beam Diameter (1/e2) @ Exit | 2.0mm | ||||
Power Stability | 1% or 3% (rms, over 2 hours, T= 25℃) | ||||
Beam Pointing Stability | <50μrad (after warm-up, 2 hours, T= 25℃) | ||||
Polarization, Linear | >100:1 | ||||
Noise of Amplitude | ~30% (rms, 1~20MHz) | ||||
Electrical Parameter | |||||
Power Supply | ADR-800A | ADR-800D | |||
Adjustable Power Supply | FDA Power Supply | ||||
Input Voltage | 85~240VAC, 50/60Hz | ||||
Modulation | TTL on/off (≤100Hz) | ||||
Mechanical Parameter | |||||
Dimensions of Laser Head | 207 × 70 × 50mm | ||||
Weight of Laser Head | 2.0Kg | ||||
Dimensions of Power Supply | 277 × 145 × 106mm | 275 × 145 × 104mm | |||
Weight of Power Supply | 2.6Kg | 2.3Kg | |||
Reliability | |||||
Warm Up Time | <10 minutes | ||||
Cooling | TEC, Forced-air cooled | ||||
Operating Temperature, Case | 10℃ ~ 35℃ | ||||
Storage Temperature | -20℃ ~ 60℃ | ||||
Expected Operation Lifetime | 10000 hours | ||||
Warranty | 12 months | ||||
Note | |||||
» The Laser is designed to operate without heat sink. Do not restrict air circulation around the device; an additional heat sink can be used to maximize the performance and life time of the laser. » All specifications are based on performance at full output power and after the specified warmup period. Output characteristics may change if the laser is run at a different power level. » 1KHz TTL modulation, 10KHz TTL modulation, 30KHz TTL modulation and 2KHz Analog Modulation are available upon request. » 2-Year Warranty is available upon request. |
Accessories (optional) | ||
Laser Products | ||||
Model | Output Power | Power Stability (2hrs, 25℃) | Modulation | IEC/CDRH Laser Class |
RL656T8-020 | 20mW | 3% rms | TTL on/off | Class 3B/IIIb |
RL656T8-050 | 50mW | 3% rms | TTL on/off | Class 3B/IIIb |
RL656T8-100 | 100mW | 3% rms | TTL on/off | Class 3B/IIIb |
RL656T8-150 | 150mW | 3% rms | TTL on/off | Class 3B/IIIb |
RL656T8-200 | 200mW | 3% rms | TTL on/off | Class 3B/IIIb |
Mechanical Drawing | ||
ADR-800A Power Supply | ||
ADR-800D Power Supply | ||
Laser | ||