Optical Parameter | |||
Output Wavelength | 532±1nm | ||
Output Power | <1mW | <5mW | 10mW, 20mW, 30mW, 50mW |
Laser Class | Class II | Class IIIa | Class IIIb |
Operating Mode | CW | ||
Transverse Mode | TEM00 | ||
Beam Divergence, Full Angle | Adjustable | ||
Beam Diameter (1/e2) @ Exit | Adjustable | ||
Power Stability | 5% (rms, over 2 hours, T= 25℃) | ||
IR Filter | Yes | ||
Power | |||
PCB Driver | Built-in | ||
Circuit Board Exposure | None. Case Enclosed | ||
Circuit Type | APC (Automatic Power Control) | ||
Operating Voltage | 3VDC or 5VDC | ||
Operating Current | <400mA | ||
Circuit Polarity | Case Positive | ||
Electrical Connections | 100mm leads, red / black | ||
Mechanical Parameter | |||
Dimensions of Laser Head | Φ20 × 70.5mm | ||
Housing / Case Material | Anodized | ||
Weight | 50g | ||
Reliability | |||
Warm Up Time | 3 seconds | ||
Heat Sink | Built-in | ||
Cooling | Forced-air cooled | ||
Operating Temperature, Case | 20℃ ~ 30℃ | ||
Operating Temperature, Case | 20℃ ~ 30℃ (Standard) | ||
0℃ ~ 40℃ (Grade S) | |||
Expected Operation Lifetime | 5000 hours | ||
Warranty | 6 months | ||
Note | |||
» The Laser is designed to operate without heat sink. Do not restrict air circulation around the device; an additional heat sink can be used to maximize the performance and life time of the laser. |
Laser Products | |||||
Model | Output Power | Diameter | Operating Temperature | Focus | CDRH Laser Class |
GL20-532F-001 | <1mW | Φ20mm | 20℃ ~ 30℃ | Adjustable | Class 2/II |
GL20-532F-005 | <5mW | Φ20mm | 20℃ ~ 30℃ | Adjustable | Class 3R/IIIa |
GL20-532F-010 | 10mW | Φ20mm | 20℃ ~ 30℃ | Adjustable | Class 3B/IIIb |
GL20-532F-020 | 20mW | Φ20mm | 20℃ ~ 30℃ | Adjustable | Class 3B/IIIb |
GL20-532F-030 | 30mW | Φ20mm | 20℃ ~ 30℃ | Adjustable | Class 3B/IIIb |
GL20-532F-050 | 50mW | Φ20mm | 20℃ ~ 30℃ | Adjustable | Class 3B/IIIb |
GL20-532F-001S | <1mW | Φ20mm | 0℃ ~ 40℃ | Adjustable | Class 2/II |
GL20-532F-005S | <5mW | Φ20mm | 0℃ ~ 40℃ | Adjustable | Class 3R/IIIa |
GL20-532F-010S | 10mW | Φ20mm | 0℃ ~ 40℃ | Adjustable | Class 3B/IIIb |
Mechanical Drawing | ||
Accessories (optional) | |||