Optical Parameter | |||
Output Wavelength | 671±1nm | ||
Output Power | 1000mW, 1500mW | ||
FDA Laser Class | Class IV | ||
Operating Mode | CW | ||
Transverse Mode | TEM00 | ||
Longitudinal Modes | Multiple | ||
Mode Quality (M2) | <1.2 | ||
Beam Divergence, Full Angle | 2.0mrad | ||
Beam Diameter (1/e2) @ Exit | 3.0mm | ||
Power Stability | 3% or 5% (rms, over 2 hours, T= 25℃) | ||
Beam Pointing Stability | <50μrad (after warm-up, 2 hours, T= 25℃) | ||
Polarization, Linear | >100:1 | ||
Electrical Parameter | |||
Power Supply | ADR-800A | ADR-800D | |
Adjustable Power Supply | FDA Power Supply | ||
Input Voltage | 85~240VAC, 50/60Hz | ||
Modulation | TTL on/off (≤100Hz) | ||
Mechanical Parameter | |||
Dimensions of Laser Head | 211 × 88 × 74mm | ||
Weight of Laser Head | 0.6Kg | ||
Dimensions of Power Supply | 277 × 145 × 106mm | 275 × 145 ×104mm | |
Weight of Power Supply | 2.6Kg | 2.3Kg | |
Reliability | |||
Warm Up Time | <10 minutes | ||
Cooling | TEC, Forced-air cooled | ||
Operating Temperature, Case | 10℃ ~ 35℃ | ||
Storage Temperature | -20℃ ~ 60℃ | ||
Expected Operation Lifetime | 10000 hours | ||
Warranty | 12 months | ||
Note | |||
» The Laser is designed to operate without heat sink. Do not restrict air circulation around the device; an additional heat sink can be used to maximize the performance and life time of the laser. » All specifications are based on performance at full output power and after the specified warmup period. Output characteristics may change if the laser is run at a different power level. » 1KHz TTL modulation, 10KHz TTL modulation, 30KHz TTL modulation and 2KHz Analog Modulation are available upon request. » 2-Year Warranty is available upon request. |
Accessories (optional) | |||
Laser Products | ||||
Model | Output Power | Power Stability (2hrs, 25℃) | Modulation | IEC/CDRH Laser Class |
RL671T6-1000 | 1000mW | 5% rms | TTL on/off | Class 4/IV |
RL671T6-1500 | 1500mW | 5% rms | TTL on/off | Class 4/IV |
RL671T6U-1000 | 1000mW | 3% rms | TTL on/off | Class 4/IV |
RL671T6U-1500 | 1500mW | 3% rms | TTL on/off | Class 4/IV |
Mechanical Drawing | ||
ADR-800A Power Supply | ||
ADR-800D Power Supply | ||
Laser | ||