Shanghai Laser & Optics Century Co., Ltd. (SLOC) | Laser | Manufacturer of DPSS Green Laser, Blue Laser, Red Laser, Yellow Laser, Infrared Laser, UV Laser | 635nm and 650nm Laser Modules | Laser Diode | Scanner, Line Lens, Combiner, Beamsplitter, Filter, Rod Lens, Ball Lens | Fiber Coupled, RGB Laser, Low Noise, SLM, Line Laser, Laser Pointer, Portable Laser

PRODUCT MENU

SCN800 Scanning System

SCN800 is a closed loop scanning system without torsion bar. The SCN800 scanning system is powered by our new Amp, Scan-V4.3A can scan at over 51Kpps @ ±8° optical with mirror size of 6mm × 11mm × 0.7mm. Higher scan speed can be achieved by using smaller mirrors and higher voltage.

Contents of Shipping Package
	2 × Scanner (Galvo) with Mirror 2 × Scan V4.3A Servo Driver (Amp) 1 × (X-Y) Scanner Mount 1 × ±24VDC Switched Power Supply 2 × Shield Cable for Scanner

SCN800 Scanning System
Scan Angle	±20° (Factory Calibration)
Scan Speed	35Kpps (±20°, 6×11×0.7mm Mirror)
Max Scan angle	±30°
Mirror Size	6 × 11 × 0.7mm	5 × 10 × 0.7mm
Mirror coating	High Quality Dielectric Film
Reflectivity	>98% @ 45° Incidence (400nm-700nm)
Dimension of Galvo	Φ12.7 × 49mm
Power requirements	±24VDC @1.2A each
Input Voltage	±5VDC Differential
Dimensions of Driver	81.6 × 66 × 43mm
Protection Circuitry	Input Clamping and Power Limiter Circuit Built in Amp.

Scanning Speed
Operating Voltage	±24VDC
Test Pattern	ILDA 30K
Scan Angle	±30°	±20°	±15°	±8°	±5°
Speed @ 6×11×0.7mm Mirror	28Kpps	35Kpps	43Kpps	51Kpps	54Kpps
Speed @ 5×10×0.7mm Mirror	28Kpps	37Kpps	47Kpps	52Kpps	57Kpps
Note
1) Bigger mirror (7.5 × 13 × 0.7mm) for high power laser is available upon request. The scanning speed is 30Kpps (±20°, 7.5 × 13 × 0.7mm Mirror). 2) When you use scanner in laser project, the scan speed (controller output) that ILDA suggests is 80% of the scanner speed, it will be good for scanner working for long time.

Diagram Wiring for SCN800	SCN800 Dimension Drawing for Galvo

SCN800 Dimension Drawing for AMP	SCN800 Dimension Drawing for Mount

SCN800 Dimension Drawing for Power	SCN800 Dimension Drawing for Cable