Shanghai Laser & Optics Century Co., Ltd. (SLOC) | Laser | Manufacturer of DPSS Green Laser, Blue Laser, Red Laser, Yellow Laser, Infrared Laser, UV Laser | 635nm and 650nm Laser Modules | Laser Diode | Scanner, Line Lens, Combiner, Beamsplitter, Filter, Rod Lens, Ball Lens | Fiber Coupled, RGB Laser, Low Noise, SLM, Line Laser, Laser Pointer, Portable Laser

1342nm Infrared SLM Laser (S3)

Key Feature

Application

Optical Parameter
Output Wavelength		1342±1nm
Output Power		10mW, 20mW, 50mW, 100mW, 200mW
FDA Laser Class		Class IIIb
Laser Crystal		Nd:YVO₄
Operating Mode		CW
Transverse Mode		TEM₀₀
Longitudinal Mode		Single
Spectral Linewidth		0.00001nm
Mode Quality (M²)		<1.2
Beam Divergence, Full Angle		1.5mrad
Beam Diameter (1/e2) @ Exit		1.5mm
Power Stability		3% or 5% (rms, over 2 hours, T= 25℃)
Coherent Length		>50m
Optical Noise		0.5% (rms, 20Hz~20MHz)
Beam Pointing Stability		<50μrad (after warm-up, 2 hours, T= 25℃)
Polarization, Linear		>100:1
Residual IR		<0.1%
Electrical Parameter
Power Supply		ADR-700D
		FDA Power Supply
Input Voltage		85~240VAC, 50/60Hz
Modulation		None
Mechanical Parameter
Dimensions of Laser Head		140. 5 × 73 × 46. 2mm
Weight of Laser Head		0.6Kg
Dimensions of Power Supply		171 × 130 × 62.2mm
Weight of Power Supply		1.2Kg
Reliability
Warm Up Time		<10 minutes
Cooling		TEC, Forced-air cooled
Operating Temperature, Case		10℃ ~ 35℃
Storage Temperature		-20℃ ~ 60℃
Expected Operation Lifetime		10000 hours
Warranty		12 months
Note
» The Laser is designed to operate without heat sink. Do not restrict air circulation around the device; an additional heat sink can be used to maximize the performance and life time of the laser. » All specifications are based on performance at full output power and after the specified warmup period. Output characteristics may change if the laser is run at a different power level. » 2-Year Warranty is available upon request.