Shanghai Laser & Optics Century Co., Ltd. (SLOC) | Laser | Manufacturer of DPSS Green Laser, Blue Laser, Red Laser, Yellow Laser, Infrared Laser, UV Laser | 635nm and 650nm Laser Modules | Laser Diode | Scanner, Line Lens, Combiner, Beamsplitter, Filter, Rod Lens, Ball Lens | Fiber Coupled, RGB Laser, Low Noise, SLM, Line Laser, Laser Pointer, Portable Laser

1064nm Infrared DPSS Laser (F1)

Key Feature

Application

IR1064F1 Series Laser
Optical Parameter
Output Wavelength	1064±1nm
Output Power	1~150mW
Spatial Mode	TEM₀₀
Mode Quality (M²)	<1.2
Operating Mode	CW
Beam Divergence, Full Angle	2.0 ± 0.2mrad ^[1]
Beam Diameter (1/e²) @ Exit	1.5 ± 0.2mm
Power Stability	5% (rms, over 2 hours, T= 25℃) ^[2]
	10% (rms, over operating temperature)
Amplitude Noise (20Hz to 20MHz)	~30% rms
Electrical Parameter
Power Supply	DDR-0605	DDR-1505
	5VDC PCB	5VDC PCB
LD operating current	50~600mA	50~1500mA
Input Voltage	5VDC	5VDC
Modulation	10KHz TTL modulation ^[3]
Mechanical Parameter
Dimensions of Laser Head	Φ20 × 60mm
Weight of Laser Head	0.1Kg
Dimensions of Power Supply	58 × 35 × 20mm	87 × 50 × 32mm
Weight of Power Supply	0.05Kg	0.1Kg
Reliability
Warm Up Time	<5 minutes
Cooling	Forced-air cooled ^[4]
Operating Temperature, Case	10℃ ~ 35℃
Storage Temperature	-20℃ ~ 60℃
Expected Operation Lifetime	10000 hours
Warranty	12 months ^[5]
Note
*[1]* 0.1mrad ~ 1.0mrad beam divergence is avaiable upon request. *[2]* Better power stability (<3% rms, over 2hours, 25℃) is avaiable upon request. *[3]* 30KHz TTL modulation (0=laser off, 1=laser on) or 2KHz Analog modulation (0~5VDC) is avaiable upon request. *[4]* The Laser is designed to operate without heat sink. Do not restrict air circulation around the device; an additional heat sink can be used to maximize the performance and life time of the laser. *[5]* 2-Year Warranty is avaiable upon request.

Mechanical Drawing (Laser Head)

Mechanical Drawing (Power Supply)

DDR-0605	DDR-1505