Shanghai Laser & Optics Century Co., Ltd. (SLOC) | Laser | Manufacturer of DPSS Green Laser, Blue Laser, Red Laser, Yellow Laser, Infrared Laser, UV Laser | 635nm and 650nm Laser Modules | Laser Diode | Scanner, Line Lens, Combiner, Beamsplitter, Filter, Rod Lens, Ball Lens | Fiber Coupled, RGB Laser, Low Noise, SLM, Line Laser, Laser Pointer, Portable Laser

532nm Green DPSS Laser with Fiber Coupler (TA-FC)

Key Feature

Application

Optical Parameter
Output Wavelength	532±1nm
Output Power without Coupler	50mW	100mW	150mW	200mW
Output Power after Coupler	40mW	80mW	120mW	160mW
Fiber Coupling Efficiency	80%
FDA Safety Class	Class IIIb
Operating Mode	CW
Beam Focus to	<100μm
Fiber Connector	FC/PC, FC/APC, SMA905
Fiber can be Attached	100μm, 200μm, 400μm, 600μm MM fiber
Power Stability	<3% (rms, over 2 hours, T= 25℃)
Residual IR	<0.1%
Electrical Parameter
Power Supply	ADR-180A
	Adjustable Power Supply, with LED Display
Input Voltage	85~240VAC, 50/60Hz
Modulation	TTL or Analog Modulation
Mechanical Parameter
Dimensions of Laser Head	140 × 49 × 42mm
Weight of Laser Head	0.6Kg
Dimensions of Power Supply	150 × 110 × 56mm
Weight of Power Supply	0.6Kg
Reliability
Warm Up Time	<10 minutes
Cooling	TEC, Forced-air cooled
Operating Temperature, Case	10℃ ~ 35℃
Storage Temperature	-20℃ ~ 60℃
Expected Operation Lifetime	10000 hours
Warranty	12 months
Note
» The Laser is designed to operate without heat sink. Do not restrict air circulation around the device; an additional heat sink can be used to maximize the performance and life time of the laser. » All specifications are based on performance at full output power and after the specified warmup period. Output characteristics may change if the laser is run at a different power level. » 2-Year Warranty is available upon request.

Laser Head, TA with Fiber Coupler


ADR-180A Power Supply