532nm Green DPSS Laser (T1) |
||
Key Feature
|
Application
|
GL532T1 Series Laser | |
Optical Parameter | |
Output Wavelength | 532±1nm |
Output Power | 50~200mW |
Spatial Mode | TEM00 |
Operating Mode | CW |
Mode Quality (M2) | <1.5 |
Beam Divergence, Full Angle | 1.2 ± 0.2mrad |
Beam Diameter (1/e2) @ Exit | 1.5 ± 0.2mm |
Power Stability | 5% (rms, over 2 hours, T= 25℃) |
10% (rms, over operating temperature) | |
Beam Pointing Stability | <50μrad over 2 hours (ambient ±5℃ ) |
Polarization, Linear | 4:1 |
Amplitude Noise (20Hz to 20MHz) | ~30% rms |
Residual IR | <0.1% |
Electrical Parameter | |
Power Supply | ADR-500D |
AC Power Supply | |
Input Voltage | 85~240VAC, 50/60Hz |
Modulation | 10KHz TTL Modulation |
Mechanical Parameter | |
Dimensions of Laser Head | 87 × 40 × 40mm |
Weight of Laser Head | 0.2Kg |
Dimensions of Power Supply | 105 × 47 × 38mm |
Weight of Power Supply | 0.2Kg |
Reliability | |
Warm Up Time | <10 minutes |
Cooling | Forced-air cooled [1] |
Operating Temperature, Case | 20℃ ~ 30℃ |
Storage Temperature | -20℃ ~ 60℃ |
Expected Operation Lifetime | 10000 hours |
Warranty | 12 months [2] |
Note | |
[1] The Laser is designed to operate without heat sink. Do not restrict air circulation around the device; an additional heat sink can be used to maximize the performance and life time of the laser. [2] 2-Year Warranty is available upon request. |
Laser Products | ||||
Model | Output Power | Power Stability (over 2hrs, 25℃) | Beam Divergence (Full Angle ) | IEC/CDRH Laser Class |
GL532T1-050 | 50mW | 5% rms | 1.2mrad | Class 3B/IIIb |
GL532T1-080 | 80mW | 5% rms | 1.2mrad | Class 3B/IIIb |
GL532T1-100 | 100mW | 5% rms | 1.2mrad | Class 3B/IIIb |
GL532T1-150 | 150mW | 5% rms | 1.2mrad | Class 3B/IIIb |
GL532T1-200 | 200mW | 5% rms | 1.2mrad | Class 3B/IIIb |
Mechanical Drawing (Laser Head) | |
Mechanical Drawing (Power Supply) | |