Shanghai Laser & Optics Century Co., Ltd. (SLOC) | Laser | Manufacturer of DPSS Green Laser, Blue Laser, Red Laser, Yellow Laser, Infrared Laser, UV Laser | 635nm and 650nm Laser Modules | Laser Diode | Scanner, Line Lens, Combiner, Beamsplitter, Filter, Rod Lens, Ball Lens | Fiber Coupled, RGB Laser, Low Noise, SLM, Line Laser, Laser Pointer, Portable Laser

671nm Red DPSS Laser with Fiber Coupled (T8)

Key Feature

Output Power up to 800mW
TEC Cooling System
Lightweight, Compact Design
Superior Beam Quality
Best Reliability and Lifetime

Application

Collimation
Laser Medical Treatment
Scientific Experiment
Optical Instrument
Spectrum Analysis
Laser Printing
Chip Inspection

Optical Parameter
Output Wavelength	671±1nm
Output Power without Coupler	200mW	300mW	500mW	1000mW
Output Power after Coupler	160mW	240mW	400mW	800mW
FDA Safety Class	Class IIIb		Class IV
Fiber Coupling Efficiency	80%
Beam Focus to	<100μm
Fiber Connector	FC/PC, FC/APC, SMA905
Fiber can be Attached	100μm, 200μm, 400μm, 600μm MM fiber
FDA Safety Class	IIIb
Operating Mode	CW
Power Stability	1% or 3% (rms, over 2 hours, T= 25℃)
Electrical Parameter
Power Supply	ADR-800A		ADR-800D
	Adjustable Power Supply		FDA Power Supply
Input Voltage	85~240VAC, 50/60Hz
Modulation	TTL on/off (≤100Hz)
Mechanical Parameter
Dimensions of Laser Head	217 × 70 × 50mm
Weight of Laser Head	2.0Kg
Dimensions of Power Supply	277 × 145 × 106mm		275 × 145 × 104mm
Weight of Power Supply	2.6Kg		2.3Kg
Reliability
Warm Up Time	<10 minutes
Cooling	TEC, Forced-air cooled
Operating Temperature, Case	10℃ ~ 35℃
Storage Temperature	-20℃ ~ 60℃
Expected Operation Lifetime	10000 hours
Warranty	12 months
Note
» The Laser is designed to operate without heat sink. Do not restrict air circulation around the device; an additional heat sink can be used to maximize the performance and life time of the laser. » All specifications are based on performance at full output power and after the specified warmup period. Output characteristics may change if the laser is run at a different power level. » 1KHz TTL modulation, 10KHz TTL modulation, 30KHz TTL modulation and 2KHz Analog Modulation are available upon request. » 2-Year Warranty is available upon request.

Accessories (optional)
Splitter 1×2	Fiber Cable	Fiber Collimator
1MHz Modulation	Safety Glasses	Carrying Case

Laser Products
Model	Output Power after Coupler	Power Stability (2hrs, 25℃)	Modulation	Fiber Connector	IEC/CDRH Laser Class
RL671T8-200FC	160mW	3% rms	TTL on/off	FC/PC	Class 3B/IIIb
RL671T8-300FC	240mW	3% rms	TTL on/off	FC/PC	Class 3B/IIIb
RL671T8-500FC	400mW	3% rms	TTL on/off	FC/PC	Class 3B/IIIb
RL671T8-1000FC	800mW	3% rms	TTL on/off	FC/PC	Class 3B/IIIb
RL671T8U-200FC	160mW	1% rms	TTL on/off	FC/PC	Class 3B/IIIb
RL671T8U-300FC	240mW	1% rms	TTL on/off	FC/PC	Class 3B/IIIb
RL671T8U-500FC	400mW	1% rms	TTL on/off	FC/PC	Class 3B/IIIb
RL671T8U-1000FC	800mW	1% rms	TTL on/off	FC/PC	Class 3B/IIIb

Mechanical Drawing

ADR-800A Power Supply

ADR-800D Power Supply

Laser