GL532SA Series Laser | ||
Optical Parameter | ||
Output Wavelength | 532nm | |
Spectral Linewidth | <0.00001nm | |
Output Power | 5mW, 10mW, 20mW, 30mW | |
Spatial Mode | TEM00 | |
Longitude Mode | Single | |
Operating Mode | CW | |
Mode Quality (M2) | <1.2 | |
Beam Divergence, Full Angle | <1.2mrad | |
Beam Diameter (1/e2) @ Exit | ~1.0mm | |
Power Stability | <3% (rms, over 2 hours, T= 25℃) | |
Beam Pointing Stability | <50μrad over 2 hours (ambient ±5℃ ) | |
Polarization, Linear | >100:1 | |
Optical Noise | <0.5% (rms, 20Hz~20MHz) | |
Coherent Length | >50m | |
Residual IR | <0.01% | |
Electrical Parameter | ||
Power Supply | ADR-180D | |
Desktop PSU | ||
Input Voltage | 85~240VAC, 50/60Hz | |
Modulation | None | |
Mechanical Parameter | ||
Dimensions of Laser Head | 140 × 49 × 42mm | |
Weight of Laser Head | 0.5Kg | |
Dimensions of Power Supply | 150 × 110 × 48mm | |
Weight of Power Supply | 0.6Kg | |
Reliability | ||
Warm Up Time | <10 minutes | |
Cooling | TEC, Forced-air cooled | |
Operating Temperature, Case | 10℃ ~ 35℃ | |
Storage Temperature | -20℃ ~ 60℃ | |
Expected Operation Lifetime | 10000 hours | |
Warranty | 12 months | |
Note | ||
» The Laser is designed to operate without heat sink. Do not restrict air circulation around the device; an additional heat sink can be used to maximize the performance and life time of the laser. » 2-Year Warranty is available upon request. |
Accessories (optional) | |||
Laser Products | |||||
Model | Output Power | Longitudinal Mode | Power Stability (2hrs, 25℃) | Optical Noise (1~20MHz) | IEC/CDRH Laser Class |
GL532SA-010 | 10mW | Single | <3% rms | <0.5% rms | Class 3B/IIIb |
GL532SA-020 | 20mW | Single | <3% rms | <0.5% rms | Class 3B/IIIb |
GL532SA-030 | 30mW | Single | <3% rms | <0.5% rms | Class 3B/IIIb |
SLM Testing | |
Longitudinal Mode Testing |
Coherent Fringes of SLM Laser |
Mechanical Drawing (Laser Head) | ||
Mechanical Drawing (Power Supply) | ||