Shanghai Laser & Optics Century Co., Ltd. (SLOC) | Laser | Manufacturer of DPSS Green Laser, Blue Laser, Red Laser, Yellow Laser, Infrared Laser, UV Laser | 635nm and 650nm Laser Modules | Laser Diode | Scanner, Line Lens, Combiner, Beamsplitter, Filter, Rod Lens, Ball Lens | Fiber Coupled, RGB Laser, Low Noise, SLM, Line Laser, Laser Pointer, Portable Laser

PRODUCT MENU

SCN804 Scanning System

SCN804 is the lowest cost scanner. It is specially designed for low-cost laser projector powered by control board with embedded software. The galvo structure of SCN804 is based on our proprietary technology which makes the cost of galvo very lower. SCN804 is a smart choice if you design a laser projector with a preprogrammed control board inside. It can be tuned up to 23Kpps @ ±15° on ILDA 30K test pattern and can do "beam show" as well as "graphic show"

Contents of Shipping Package
	2 × Scanner (Galvo) with Mirror 2 × Scan V2.5G Servo Driver (Amp) 1 × (X-Y) Scanner Mount 1 × ±15VDC Switched Power Supply 2 × Shield Cable for Scanner

SCN804 Scanning System
Scan Angle	±20° (Factory Calibration)
Scan Speed	20Kpps (±20°, 6×11×0.7mm Mirror)
Max Scan angle	±30°
Mirror Size	6 × 11 × 0.7mm	5 × 10 × 0.7mm
Mirror coating	High Quality Dielectric Film
Reflectivity	>98% @ 45° Incidence (400nm-700nm)
Dimension of Galvo	Φ12.7 × 49mm
Power requirements	±15VDC @1.0A each
Input Voltage	±5VDC Differential
Dimensions of Driver	75 × 45 × 39mm

Scanning Speed
Operating Voltage	±24VDC
Test Pattern	ILDA 30K
Scan Angle	±30°	±20°	±15°	±8°	±5°
Speed @ 6×11×0.7mm Mirror	16Kpps	20Kpps	23Kpps	28Kpps	32Kpps
Speed @ 5×10×0.7mm Mirror	17Kpps	21Kpps	24Kpps	30Kpps	33Kpps
Note
When you use scanner in laser project, the scan speed (controller output) that ILDA suggests is 80% of the scanner speed, it will be good for scanner working for long time.

Diagram Wiring for SCN804	SCN804 Dimension Drawing for Galvo

SCN804 Dimension Drawing for AMP	SCN804 Dimension Drawing for Mount

SCN804 Dimension Drawing for Power	SCN804 Dimension Drawing for Cable