DPM Crystals - High Power |
||
A new microchip crystal assembly (DPM) is available in SLOC for high power Diode Pumped Green Lasers. This new type of DPM crystals, consist of Nd:YVO4 and KTP, could used for high pump power, and generated high power green laser output. The typical pump power is suggested to be less than 500mW, and the generated green output power could be about 60mW. And a heat deposit mechanics is needed. This DPM microchip lasers could be used in some laser display systems, for example: Green Laser Module, 3D lasers, Club lasers and Disco lasers. |
DPM Efficiency Curve | |||
Specification | |||
Parallelism | Less then 5 arc second | ||
Coatings | Incident Surface: HR R>99.8% @1064nm, R>99% @532nm, & HT R<5% @808nm Output Surface: HR R>99.8% @1064nm, HT R<5% @532nm |
||
Output Wavelength | 532nm | ||
Beam Mode | TEM00 | ||
Output Power | 5~60mW | ||
Standard Products | |||
Part No. | Clear Aperture (mm) | Length (Nd: YVO4 + KTP) (mm) | Total Size (mm) |
DPM0201 | 1.0 × 1.0 | 0.5 + 2.0 | 1.0 × 1.5 × 2.5 |
DPM0202 | 1.5 × 1.5 | 0.5 + 2.0 | 1.5 × 2.0 × 2.5 |