GL561T8M Series Laser | ||
Optical Parameter | ||
Output Wavelength | 561±1nm | |
Output Power | 20mW, 30mW, 50mW, 100mW | |
Transverse Mode | Near TEM00 | |
Operating Mode | CW | |
Mode Quality (M2) | <1.5 | |
Beam Divergence, Full Angle | <1.5mrad | |
Beam Diameter (1/e2) @ Exit | ~3.0mm | |
Power Stability | <1% or <3% (rms, over 2 hours, T= 25℃) | |
Beam Pointing Stability | <50μrad (after warm-up, 2 hours, T= 25℃) | |
Polarization, Linear | >100:1 | |
Electrical Parameter | ||
Power Supply | ADR-800M | |
FDA Power Supply | ||
Input Voltage | 85~240VAC, 50/60Hz | |
Modulation | >1MHz | |
Mechanical Parameter | ||
Dimensions of Laser Head | 213 × 98 × 60mm | |
Weight of Laser Head | 1.9Kg | |
Dimensions of Power Supply | 269 × 181 × 104mm | |
Weight of Power Supply | 2.7Kg | |
Reliability | ||
Warm Up Time | <10 minutes | |
Cooling | Forced-air cooled | |
Operating Temperature, Case | 10℃ ~ 40℃ | |
Storage Temperature | -20℃ ~ 60℃ | |
Expected Operation Lifetime | 10000 hours | |
Warranty | 12 months | |
Note | ||
» The Laser is designed to operate without heat sink. Do not restrict air circulation around the device; an additional heat sink can be used to maximize the performance and life time of the laser. » All specifications are based on performance at full output power and after the specified warmup period. Output characteristics may change if the laser is run at a different power level. » 2-Year Warranty is available upon request. |
Accessories (optional) | ||
Laser Products | ||||
Model | Output Power | Power Stability (over 2hrs, 25℃) | Modulation | IEC/CDRH Laser Class |
GL561T8M-020 | 20mW | <3% rms | 1MHz TTL | Class 3B/IIIb |
GL561T8M-030 | 30mW | <3% rms | 1MHz TTL | Class 3B/IIIb |
GL561T8M-050 | 50mW | <3% rms | 1MHz TTL | Class 3B/IIIb |
GL561T8M-100 | 100mW | <3% rms | 1MHz TTL | Class 3B/IIIb |
Laser Head | |||||
Power Supply ADR-800M | |||||
Modulation | |||||